Production technology of furniture parts
Modern production is based on the use of advanced technologies and high-quality natural raw materials.
01. Selection
Checking wood for compliance with quality characteristics
02. Welding of the ridge
Poplar logs are steamed several times in special tanks
03.Removing the bark
The bark is removed from the logs
04. The peeling
The peeled log is fed to the peeling machine, the veneer strip is peeled and comes out (a thin section of wood)
05. The wheelhouse
The peeled veneer is cut to the required size
06. Drying
The peeled veneer is selected according to grades and goes through the drying stage in the drying chamber, the sliced veneer is dried
07. Pressing
The veneer is coated with an adhesive compound on both sides and placed under a press for further bonding at high temperature
08. Cutting
The veneer is sawn into parts on the machine
09. Processing
The resulting products are ground and faceted
10. Sorting
At the final stage, the products are sorted by length, width and thickness, as well as by wood shades.